AT40/32 TECHNICAL SPECIFICATIONS

Carrier chassis

Chassis LUNA, 4 x 4 x 4

Engine MERCEDES BENZ. OM906LA. 205 kW (278 HP)/ 2300 rpm.

Transmission ZF. Torque converter and lockup clutch. Maximum speed: 80 km/h. Gradeability: 60%.

Axles All 2 steering-drive, double reduction in differential and hubs. Transversal lockout. Disconnectable front axle.

Suspension Hydropneumatic. Blockage on the axles. Independent control for each wheel. Automatic levelling.

Tyres 4+1 tyres size 14.OOR25. Single mounting.

Cab 2.2 m. width, 2 seats, manufactured in steel with chemical anticorrosive treatment. Non Shattering glasses. Controls and indicators for crane motion.

Superstructure

Hydraulic system 1 double vane pump and one variable flow single pump coupled to the gearbox. All crane movements can be effected simultaneously with either empty or half load and two of them under full load.

Winch LUNA, driven by a variable motor and equipped with an automatic freewheeled brake. Maximal single line pull: 3500 kg to 57 m/min. Minimal single line pull: 1500 kg to 124 m/min. 13 mm rotation resistant wire rope. Length: 150 m.

Boom luffing One single effect cylinder. From -2° to 82°. 40 sec.

Telescopic boom One basic section and 3 telescopic ones by means of one cylinder and a double rope system. Fabricated in high elastic limit steel. Length: 32 m. Telescoping speed: 0.3 m/sec.

Siew ring ROTHE-ERDE, external rack. 360° Continuous rotation.

Cab Inclinable from 0 to 20°.New design allowing greater visibility of loads at big heights and more comfort.

Safety devices Lowering limit switch system. Load indicator on hook. Safe load indicator with anti-two block system. All circuits are fitted with safety valves and piping anti-breakage valves.

Optionals

Jib Lattice jib 8.5 and 15 m. long. Swingaway on boom side. 0°, 15° , 30° and 45° offset. Hook: up to 10 t.

Recovery winch 4500 Kg line pull. Installed at the front of the superstructure. 16 mm rotation resistant wire rope. Length: 50 m.



Back LUNA range