EXAMPLE OF MOUNTING

RISA CRANE DIGGER TA 60.33 MODEL, MOUNTED ON VI Truck KERAX 4x4, 19 T GVW.

Crane specially designed and manufactured by RISA for hole drilling and lifting of reinforced concrete poles (600 units working all over the world ).

CRANE DIGGER TA 60.33 CARACTERISTICS :

• Direct lifting 6 000 kg at 3,30 m from the turret axle and on the 360° rotation.
• Crane digger mounted at rear of the truck.
• Height under hook 11,20 m with 2 hydraulic articulated booms and 2 hydraulic telescopic extensions. Each of them have independant control.
• Working horizontal distance at hook 8 meters.
• Continuous boom rotation without limitation with crown diam 1 000 mm, automatic security brake and rotating oil seal.
• Hydraulic and proportional valve bank elements for the functions of lifting, digging, rotation, stabilization...
• Electronic overload protection.
• Hydraulic twin body pumps with fix flow 2 x 57 cm3
• Driving post with twin place seat, on top of turret.
• Steel reinforced frame box.
• Outriggers hydraulically articulated model "A" in front with vertical extension and hydraulically articulated model "A" with horizontal and vertical extension at rear.
• Hydraulic digging motor without reducer, continuous torque 1 600m.kg, mounted on the first telescopic extension.
• Drilling working distance : Minimum : 1,95 m from the axle of the turret - Maximum : 5,85 m from the axle of the turret.
• Automatic storage of the auger along the second arm.
• Auger fitting hex. Hub 70 mm, rotation right or left for the ejection of the drilling cutting.
• Automatic acceleration of the truck engine depending of hydraulic needs of each function.
• Poles carriage by 2 lateral supports with transportation as follow ( in front : on top of the cabin ) : Capacity 2 x 2 000 kg ( or 1 x 1 500 and 1 x 2 500 kg ).
• Oil cooler to maintain a normal temperature inside the hydraulic system.
• All hydraulics cylinders equipped with safety valves.
• Auxiliary quick couplers at rear of the truck to connect hydraulic hand tools like paving breakers, grinder, pump.... pressure 140 bars, oil flow 35 l.mn.
• Rock auger diam 650 mm with carbide bits.
• Lockable tools box along both side of the platform on the truck : Lenght 3,30 m, height 0,60 m, width 0,50 m with lateral or top opening.

RVI TRUCK MODEL KERAX 260.19 / 4x4 CARACTERISTICS :

• Engine MIDR 06.2045 C/4 diesel, 6 cylinders in line, direct injection.
• Power 188 KW ( 256 Hp ) at 2 100 r.pm turbo charged and intercooled.
• Gross vehicle weight 19 Tons / GCWR 32 Tons.
• Wheelbase 4 100 mm.
• Gear box with 9 forward gears ( fully synchromesh ) and 1 reverse gear.
• Front stabiliser bar.
• Deep cab two doors for 5 passengers + driver ...
• Power take off 200 Dan on transfert case.
• 24 V electrical system.
• Tool box.
• Towing hook ROCKINGER 260 G 145.
• Air suspended driver's seat, seat belt, headrest ...
• Dual passenger seat.
• Tyres B 1 200 R 20.

GENERALITIES :

• Colour white for the crane digger and the truck.
• Material completely in accordance with EEC Norms.
• Material tested by French administration organism for all the security systems ( stabilisation, capacity and overload protection ).
• One yellow winking light, fitted on turret.
• Operator's manual and spare parts catalogues.

Crane digger range